At the first press of the power button to switch on the computer, the hard disk is not detected, BIOS says "unknown device" instead of hard disk.
Then I switch off the computer by pressing the power button and turn it back on and then as if by magic, the hard-disk is detected and everything boots up and works fine.
I am forced to think that the hard-drive is bad, (I did change the hard drive cable with a new one but with no success).
This has been happening for a week and without fail, it always works the second time the computer is switched on. The switching on-off-on must occur one after the other with no or a few seconds time interval.
Why does it always work the second time?
Answer
Sometimes this is caused by the computer trying to boot before the harddrive has time to spin up. I believe this usually happens on drives which have many platters (due to the weight the motor takes longer to get up to speed), but that may be entirely incorrect ;-)
Usually there's a setting in the bios to add a delay before detecting the disks. I'd suggest trying there first.
edit: this article indicates it's actually due to ide drives taking longer to initialise. Same solution, though.
No comments:
Post a Comment