I'm considering purchasing a NAS, a Synology DS216 (or perhaps a DS216j).
I have 2x 2TB drives available; one is full of data; the other is blank. I want to use the NAS in a RAID-1 configuration, to replicate the data from drive 1 to drive 2, and use them for backups going forward.
I'm on a Mac: the drives are formatted HFS+.
Will these two drives be sufficient with this equipment? Will I be able to insert both drives into the NAS, and be off to the races?
On the other hand, would I have to reformat the drives for use, or otherwise risk losing the data on the full HD? In this case, is it better to start with two blank drives, and copy my data post-setup?
Thanks.
Answer
The Synology will format the disk before it can use them. (This is the case for all NAS boxes I have ever encountered.)
However there is a "sort of" way around this.
Install the empty drive in the Synology. Hookup the other drive, via the USB port. (External disk enclosure or a USB<->SATA converter cable required.)
The Syno will be able to read the HFS+ drive.
In the Syno itself now copy the data from the external drive to the internal one.
(Alternatively, hookup the full drive to the Mac and copy the data to the Syno across the LAN. This might actually be faster if your USB connection is USB2.0.)
After all data is moved to the single disk in the Syno you can place the 2nd disk inside the SYno and have the Syno upgrade itself to a RAID-1.
No comments:
Post a Comment